- Видео 18
- Просмотров 221 904
samzoneworld
Добавлен 12 окт 2010
kubota sv95-2s burned (ressurection) #1
This is the first video of a big project im taking on and will be recording the process. The objective of these videos will be to help anyone that wants to buy cheap and burned construction equipment to fix it. Not all burned equipment can be resurrected but these videos will show you what to look for before buying it.
Просмотров: 163
Видео
HEAVY EQUIPMENT JUNK YARD (florida)
Просмотров 2712 года назад
this junknyard is in davenport florida is very big i make this video in case someone need used part for heavy equipment price are reasonable
qiewa q1 scooter modification and ninebot max 33mph part 2
Просмотров 8193 года назад
drive.google.com/file/d/1X1clqwW5rCwL5V6cqUxx_jsFJHyWn4sq/view?usp=drivesdk here is the file but is build to work togheter with the motor update if you use this file with the max original motor they will.be no difference in speed the motor you need is from electisan 350 you can also build your own custom firmware with more power than the one i have here and i am pretty sure you will go lot fast...
qiewa q1 scooter modification and ninebot max 33mph speed
Просмотров 4193 года назад
qiewa q1 scooter modification and ninebot max 33mph speed
ninebot max (g30) controller st link connection
Просмотров 9 тыс.4 года назад
here is the st link pinout connection for ninebot max and the full firmware file for flashing any max controller and also the dashboard original firmware all this need to be done with st-link just watch this video ruclips.net/video/hf_KrEb76ZY/видео.html is the samething but you dont have to do do the serial number change you will have the sport serial number allready after you flash the contro...
ninebot max(g30) battery bms bypass
Просмотров 14 тыс.4 года назад
facing the bms the left ground cable is going straight to.the battery negative make sure you leave the bms cable connected if not the bms will not charge the battery the tiny red cable is just to feed the bms this cable will not consume to much power i did that because the cable is to short so i cut them and use it for make it longer and them i put the small red cable for bms feed
ninebot es 4,3,2,1 external battery firmware downgrade
Просмотров 9 тыс.4 года назад
this method is little crazy but i did it because i never found any solution for this online at least is better than nothing they should be a better way around but i never find it so enjoy this one for the moment and by the way the downgrade app is (((((ninebot.fun utility))) this solution is for those that dont have a pc with windows 10 and bluetooth and microsoft account to download ninebot fl...
bird 590 bms bypass
Просмотров 15 тыс.4 года назад
so guys let me put something very clear for those people that dont know anything about bms, by doing this method you only will bypass the current draw side of the bms not the charging side of the bms. never never bypass the charging side of a bms its very very dangerous consequences can be catastrophic.
new jump scooter battery open part 2
Просмотров 3,5 тыс.4 года назад
new jump scooter battery open part 2
new jump scooter battery bms bypass
Просмотров 24 тыс.4 года назад
so guys let me put something very clear for those people that dont know anything about bms, by doing this method you only will bypass the current draw side of the bms not the charging side of the bms. never never bypass the charging side of a bms its very very dangerous consequences can be catastrophic
bird one scooter 590 complete conversion
Просмотров 34 тыс.4 года назад
music by : bensound.com for lcd setting use the other video for that controller link:www.amazon.com/gp/product/B07G84YGJN/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 ok guys so calvin rennells is the one that already try a 500w and a 1000w controller not me and he only gain torque at suppose to be for speed you need more voltage he also have a facebook group BIRD ONE (BIRD #590) OR E-SCOOT...
bird 590 controller setting
Просмотров 21 тыс.4 года назад
www.pedelecforum.de/forum/index.php?attachments/s866-lcd-pdf.247290/
Any update?
tafter i make that video i bearly work on it but like few mo ths ago istart working again on it and is almost done they only start with starting fluid because has a internal error code in the engine ecm so i need to order the kubota scanner to see what exactly happen but i think maybe the ecm when bad with the fire but at soon i scan it i will find out when i finish .i will.do another video covering all the process with pictures
Hi Everyone! I bought a used 590 for my son. It's not in the best shape requires some work but was quite cheap. ;) Anyway It is good for us but some things are missing: 1. the unit is always ON, so it drains the battery - there is no button to turn ON/OFF 2. there is no speedo/battery-meter So I made some research on the net how to re-buid the scooter and found samzoneworld's videos which says: 1. I have to replace the ESC. 2. Unfortunately the aftermarket ESCs are big, so only the 350W ESC fits into 3. I read several posts about low speed issue or ESCs turning OFF after several secs 4. the solution to both problems is to open the battery and change the BLACK cable to override certain part of the battery's BMS module???! Does it help with the built-in security whatever in the battery? 5. but does it really solves both issues? 6. what will be possible max. speed, the same with the old 500/750W ESC? 7. what about the controlling board which contains the GPS/SIM module? will it work w/o a controlling board? the original ESC ofc does not work w/o that unit... 8. what about just adding an external screen to the original ESC (with ON/OFF buttons) - I guess this is where a re-flashing would be necessary? I hope I understood everything correctly.... Many thanks for any help!!!!!
Добрый день что будеть если не установит приоброзаватель
I have followed everything you have in the video except the DC Step down and after about 10 seconds my screen just shuts off. What can I do ? What part in the video did i miss ?
bms bypass
Bneg to p1 neg?
I'm stuck at another problem. Where can I get spare tires for the Bird 590 motor? They use some uncommon 9x2.125 inch tires. Does anyone know a vendor of such tires? Preferably in Europe. Mine is falling apart.
Did you ever find a place that sells them
@@Jae-T219 yes, just a few days ago. Mikrofahrzeuge Lindau. They have them in their Webshop.
Whats max continious discharge current for the bypass?
what controller should I get on aliexpress? Which model should I take?
any you can afford as long is a universal controller kit will work
Can SOMEONE PLZ ASAP TELL ME THE ARRANGEMENT OF THE BOLTS THAT GO AROUND FORK AND Driving TUBE
Todo perfecto , solo las luces no me funcionan
I recently discovered an abandoned Bird in Germany. Bird pulled out if Germany last year so nobody was going to pick that one up. My battery has an additional label on it, that says "OTA with Anti-Theft". Should I be worried that this battery has its own SIM module?
To answer my own question, no it has no SIM module inside and no tracking. It also can be opened with a heatgun. Seems to be safer than with a circular saw.
Burned down already? It's a totally clever idea to take a metal screwdriver and scratch it over a non-visible BMS while it is still connected to the cells.
Hey bro. Can you maybe explain. What are the 4 wies from the akku are you not connect?
that the bms communication wires but you dont need that
@@samzone8920 i have the problems with the power cut of after few Meter of driving, and i dont want to Do the bms Bypass. So i search for a other idea to solve this issue. Can you Tell me what Every wire Do exactly. I cant find anything about the akku wireing.
Any idea?????
@@peterplenk2166 there is one only option replace the original bms with a aftermarket bms but if you bypass the bms.correctly nothing ever will happen
@samzone8920
my scooter worked perfectly but then the throttle stopped working. I setted every display setting like you and it still doesnt accelerate. Could someone please help me?
Hey man you still running into this problem I know an easy solution it only requires you to have a computer, download a file, have a phone and Bluetooth the scooter. Then it's just a matter of flashing, (battery firmware version) and your done.
Aue Sam. Im in PHX and having big issues removing the wires so i can take the stem, forks etc to get welded. Stem broke off at neck.
Hello
could this work without buying any parts? just bypassing the BMS
no
Hi, thanks for your explanation. I bought the same kit and it worked! but now I have E-10 it doesn't allow me to speed up. If you have the answer please answer me!
I broke stem off at neck and need to take to get welded. Whats best way to unplug the cords from there? VERY IMPORTANT ASAP
Csn someone show me the setup for how the bearings and nuts go on the neck and stem
Hello Sam, I have a Bird 590 and the battery has depleted below the normal and will not cut back on. Can I jump start it and if so how?
What kind of range can you get on these battery? 36v 350w hub motor on pedal assest .
i know this was 6 mths ago you asked but i got 30 miles on 2 of these conected together with minimum pedaling could of got more , i did a video on the battery build and the range test ,im half way through the peddal assist range test video
Will it effect the changing of the battery like over changing? Or will it change normal and kick out when full changed?
Can I also ride on it without that controller on my steeringwheel ?
if you dont want the display on your steering then buy the controller that dont use display
Any idea how to reset forgotten pw?
yes i have the procedure in my office computer when i have a chance i upload it here
Hey Sam, I watched all your videos of the bird scooter 590 thoroughly and did every step exactly the same as you did. But my scooter only reaches a maximum speed of 17mph even on setting 5 on the controller. Do you know what I did wrong? Thanks in advance for your reply. Regards
I also did the battery bypass so that's not the problem 🙂
I broke the stem off at the joint on my Bird One. Can someone help me asap
Hello
It shouldn't be in vain!!! € get in touch 😊
Hello, I have a question, my controller just always goes off when I drive faster, I have to disconnect it from the power supply and plug it in again and then the controller works again, what's the problem ???
you need to do a bms bypass
@@samzone8920 ok is there a video of that too? and can nothing happen there? Greetings
@@golfrobert yes i have a video of that just look for it
@@samzone8920 Thank you again for the answer!!! But I still have one question, do you have to be afraid of a fire with the bypass? like your experience ? is the BMS board still active? Greetings
@@golfrobert always use common sense and be very careful because those battery are very powerful but if you do all correctly never will be risk of fire
Hello, do you have a link where I can get the controller from Germany? Or can you make one for the BIRD 590? Greetings
I found mine on eBay and it works but I struggle to get the front light working because the German is different from the other ones. Did you manage to get your front light working?
Did you manage to make the lights work?@@ShadowTheHedgehog85
@@m.lki67 yes. Supply voltage to both contacts and GND to the negative. The German front light has 3 contacts. One is for switching the light on and off.
Thanks for your help Is there anything else to make in the german version or everything like in this video except the light?@@ShadowTheHedgehog85
@@m.lki67 I mean, the biggest difference is, the motor is on the rear. Tighten the motorised wheel! Mine got loose after climbing a hill. The motor has a good amount of torque. Lights are 36v front and rear. No need for the step down converter.
I finished the wiring. I think I did everything right when I connect the power. I don't get any light on my LCD screen. What should I check with my multimeter to figure out what I might be missing here?
Nice 👍🏽
Hi sam . I have a scooter that the connectors are similar to this one but the main plug that you have blue with 4 pins the one I have it's green with 5 pins what can the extra pin be about . The color of the extra wire is blue
Hello, I have done this, but the battery now only charges to 31V, any clue what the problem is? I have tried to resolder to the original wire, but now only charges to 31v, i have also tried two chargers, same problem.
hard to tell from here but make sure you did the bypass in the correct battery cell
@@samzone8920 Yes, your instructions are vey simple! Dont know why, but now only charges to 31V
@@jorgehumbertosilva in that case you probably have bad cells you need to test them one by one to find the bad one
@@samzone8920 You are correct, i started disassembling the battery (not easy) and found that one set of 8 cells are all dead, no charge at all. Thank you!
Will help bypass the anti theft feature as mine turns of after 10 seconds of riding my scooter
yes
I really appreciate your quote expertise in this controller programming and showing me how to program every setting even though you don't know what the hell it does I haven't gotten that far yet though I'm still emptying the jello out of mine. Thank you
When hooking up my new motor controller I could not find the jello wire. I looked everywhere there was red, green, black blue etc but absolutely no Jello wires do I go to the store and buy some of my own mix and make my own Jello wires wouldn't that short out the controller? do I just need it to jiggle? help my scooter won't run cuz it's full of jello now
Ysuper
hello do you have any smple ways to fix error code 10 , this came about when i changed the brake lever sensor, there are no broken connectins between dash and controller.. i previously changed serial number so now i cant use ninebot flasher or scooter hacking app etc. it connects but will not allow me to flash or do anything
Wen are u gonna post u"de best video about the Bird One e-scooter ?
Do u still own a Bird One
Pls help me... Hello, I made all the connections as in the video. After working for 1 minute, the LCD gave a communication Fail. The icon on the screen is this ((!)
did you by pass the bms?
@@samzone8920 yes battary bypass . B- and B+
@samzoneworld Can we contact you by phone please. I live in Turkey. There is no one here to solve this problem. Is it possible to talk on whats app?
Do you know a new link for the controller that's less than $100?
no sorry
@@samzone8920 thank you
What wattage is best to buy for the 12v 24v 5a converter voltage regulator for dc stepdown ? The ebay link is down for me.
Please help me. I joined the cables. It worked for 2 minutes. Then ((!)) (Communication failure) gave the error. what could be the problem
i need more details
@@samzone8920 I made all the connections. but i got this communication error. I bought a new part and tried it, but it didn't work.
witch wires r for the throttle
I love the part were you use a mallet to delicately remove the bushing from the wiring harness. That is the same kinda shit I do whenever something that should be easy is giving me hell. Blam!! take that you piece of shit bushing!! lol.
hey i did everything but my bird one still not working. throttle was working at the beginning and left it charging over night. the next day the throttle didnt work. did the bms bypass and still nothing. any suggestions i can do to make it work?
hard to tell from here you need to recheck all connections
@@samzone8920 i did twice. i disconnect the battery put it back and turn the lcd and it runs for 3 seconds and then stops. do you think i fried the module? or what throttle signal should i check?? thank you
@@jonathancruz4198 did you bypass the bms?
@@samzone8920 yeah i did it today but last night it was working just fine even without the bms bypass i think i probably damage the controller but i dont see where the problem was. just to make sure the throttle goes with the green signal right?
@@jonathancruz4198 is all is good then you controller when bad
Why did you change the original control?
Oye brother ve El canal de GERALD CLARK, EL SABE MUCHO DE ESO .
Thank you very much for this great video! Have you found a way to change the tires? Thanks again! :)
Hey i just bought a controller from ebay like a universal one can you do a wiring diagram or maybe link one for me ??
i have a video about how to connect it
@@samzone8920 im sorry i actually was talking about battery bms😄